Angelcare AC601 Baby Breathing Movement and Audio Monitor with Wired Sensor Pad

Thank you for contacting Angelcare. The AC601 does not have the talkback feature. Regards,

Thank you for contacting Angelcare. Here are the instructions on how to deactivate the sensor pad feature. Plug the Sensor Pad into the back of the Nursery Unit Switch the Nursery and Parent Unit ON Ensure that the Nursery and Parent Unit are both on the same channel (A, B or C) On the back of the Nursery Unit there are 3 options: Sound & Movement: This setting lets you monitor baby’s movement and also hear a constant TIC sound every few seconds from the Parent Unit TIC Off: This setting lets you monitor baby’s sounds and movement without the constant TIC sound Sound Only: This setting lets you monitor baby’s sounds but NOT movements or TIC Depending on whether you wish to monitor Sound & Movement with or without the TIC choose either Sound & Movement or TIC Off Sincerely,

Thank you for contacting Angelcare. On the AC 601, yes you can but it is not necessary. Sincerely

Have a nice day Thank you for contacting the helpline. We think that the constant beeps that you are hearing from the Parent Unit only is the TIC function. This indicates that your monitor is detecting movement without physically looking at the Parent Unit screen. Some parents love this sound as they find it reassuring, however not all do so this is an optional function so you can monitor baby's movements without this. To set your monitor to detect movement without the TIC beeps, when looking at the back of the Nursery Unit move the wing on the left hand side to the middle position – TIC OFF. Your monitor will now continue to detect your baby’s movement without the constant beeps. If you need any further advice please contact Customer Service : [email protected]

Thank you for contacting the helpline. Unfortunately you can't buy a Nursery Unit that will work with your actual AC601. You need to buy a completely new monitor to get the other room covered. Because you have an AC601 you can buy any Angeclare Monitor, as you can manually change the channel on the AC601 if any interference should occur.

Yes, replacement parts can be purchased through Angelcare customer support.

Yes, the AC601 can be used as a sound only monitor. The right wing would need to be set to sound only instead of sound and movement.

It could be a couple of things. 1. if it is taking a little longer to alarm after you remove baby from the crib it could be the mattress recovering so the sensor pad is still detecting movement. 2. If you are standing next to the crib waiting for the sensor pad to alarm, the sensor pad could be detecting your movement. 3. You may need to increase the sensitivity level of the sensor pad. If you would like more information please contact our customer service team by phone or email.